Selecting The Input Source For Your Tv; Adjusting Picture Settings - Insignia NS-PDP42-09 Guia Del Usuario

2 Press ENTER to enter the CHANNEL menu.
The CHANNEL menu opens.
3 Press or
press ENTER. The Custom List opens.
Del/Add/Fav Move
4 Press or
channel you want to edit.
5 Press ENTER to select that channel to add to
the list, delete from the list, or designate as a
favorite.
6 Press MENU to return to the previous menu,
or press EXIT to return to normal viewing.

Selecting the input source for your TV

To select the input source:
1 Press INPUT on the remote control. The
INPUT menu opens.
2 Press or
inputs. Input sources which are not available
(connected) are grayed out. Choices include
TV, AV1, AV2, Component1, Component2,
RGB(PC), HDMI1, HDMI2, and HDMI3.
3 Press ENTER to confirm your choice.
Changing the input label
To change the input label:
1 Press MENU on the remote control, then
press or
20
to select Channel Edit, then
MENU Previous Exit Exit
or or to select the
to cycle through the available
or or to select OPTION.
www.insignia-products.com
Insignia NS-PDP42/50-09 Plasma TVs
2 Press ENTER to enter the OPTION menu.
The OPTION menu opens.
3 Press or
press ENTER to enter the sub-menu.
4 Press or
you want to change the label, then press
or to select the label you want.
5 Press EXIT to return to the previous menu, or
press MENU to return to normal viewing.

Adjusting picture settings

Setting the picture size (aspect ratio)
This feature lets you choose the way an analog
picture with a 4:3 aspect ratio is displayed on
your TV.
The RGB-PC input source uses 4:3 or 16:9
aspect ratio.
Caution
If a fixed image is displayed on the screen for an
extended period of time, the image could become
imprinted on the screen and remain visible.
This phenomenon is common to all manufacturers
and is not covered by warranty.
After watching video that does not fill the screen,
an after-image from the black bars normally
dissipates after a few minutes.
Choices include:
• Set by program—Selects the correct
picture proportion to match the source's
image.
• NORMAL—Choose this when you want
to view a picture with the original 4:3
aspect ratio.
• WIDE—Adjusts the picture horizontally to
fill the entire screen.
to select Input Label, then
to select the source for which