Features; Accessories; Front; Back - Insignia NS-PDP42-09 Guia Del Usuario

Insignia NS-PDP42/50-09 Plasma TVs

Features

Accessories

Make sure that the following accessories are
provided in the package:
• Power cord
• Remote control and batteries (2 × AA)
• User manual
• Protection cover
• Bolts for stand assembly
• Cable holders
• Cable management clip
• Polishing cloth

Front

# Item Description
1 POWER button Press to turn your TV on or off.
2 INPUT button Press to select the AV signal input. You can
select TV, AV1, AV2, Component1,
Component2, RGB-PC, HDMI1, HDMI2,
or HDMI3.
3 MENU button Press to open the on-screen menu.
4 ENTER Press to confirm your selections.
5 VOL - Press to decrease the volume.
6 VOL + Press to increase the volume.
7 Press to change to a lower channel.
CH
8 Press to change to a higher channel.
CH
9 Power/Standby Lights when your TV is plugged into a
indicator power outlet. When your TV is on, the
indicator is blue. When your TV is in
standby mode, the indicator is red.
10 IR sensor Receives signals from the remote control.
Do not block.

Back

# Description
1 USB (service only)
2 HDMI IN 3
3 AV IN 2 (composite
video and L/R audio)
4 Digital audio (optical)
output
5 RS-232 IN (control and
service only)
6 REMOTE CONTROL IN
7 RGB IN
8 ANTENNA/CABLE IN
(coaxial antenna)
9 AV IN 1 (S-Video,
composite video, and
L/R audio)
www.insignia-products.com
AV IN 2
Function
Used for software updates.
Connect an HDMI cable to this
connector. Supports HD video
and digital audio. Does not
support 480i. Accepts DVI video
using an adapter or HDMI-to-DVI
cable (not included).
Connect analog composite video
(480i) and audio input to these
jacks.
Connect to an amplifier or home
theater system to this jack. (Does
not work in standby mode.)
Used by third-party devices.
Connect a wired remote control
to this jack.
Connect a VGA (D-sub) cable
from your PC to this connector
(analog PC). Connect a 1/8"
headphone plug to the AUDIO IN
jack for analog PC audio.
Connect a 75 ohm cable from an
antenna, cable TV wall jack, or
cable box to this jack.
Connect a video cable (analog
composite video - 480i) or an
S-Video cable (better quality
480i) to the appropriate jack.
Connect L/R audio cables to the
AUDIO IN jacks for either
connection.
7