Connecting External Equipment - Insignia NS-PDP42-09 Guia Del Usuario

Connecting external equipment

Connecting external equipment using composite
video (good—analog)
ANT OUT
S-VIDEO VIDEO L R
ANT IN OUTPUT
SWITCH
To connect a standard video device to the
AV IN 1 or AV IN 2 video jacks:
1 Plug an RCA video cable into a standard
video source and into the AV IN 1 video
(yellow) jack on the back of your TV or the AV
IN 2 video (yellow) jack on the side of your
TV.
2 Plug the RCA audio cables into the video
device's audio output jack and into the
AV IN 1 AUDIO L (white) and AUDIO R (red)
jacks on the back of your TV or the AV IN 2
AUDIO L (white) and AUDIO R (red) jacks on
the side of your TV.
3 Turn on your TV.
4 Press INPUT, press
AV2, then press ENTER to confirm.
12
or to select AV1 or
www.insignia-products.com
Insignia NS-PDP42/50-09 Plasma TVs
Connecting external equipment using S-Video
(better—analog)
ANT OUT
S-VIDEO VIDEO L R
ANT IN
OUTPUT
SWITCH
To connect a standard S-Video device to the
AV IN 1 S-Video jack:
1 Plug an S-Video cable into the S-Video out
jack on an S-Video device and into the
AV IN 1 S-VIDEO jack on the back of your
TV.
2 Plug RCA audio cables into the S-Video
device's audio output jacks and into the
AUDIO L (white) and AUDIO R (red) jacks on
the back of your TV.
3 Turn on your TV.
4 Press INPUT, press
then press ENTER to confirm.
or to select AV1,