Using Your Tv; Turning The Tv On And Off; Changing Channels; Adjusting The Volume - Insignia NS-PDP42-09 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Insignia NS-PDP42/50-09 Plasma TVs
Phase—Use this to remove any
horizontal noise and clear or sharpen the
image. The phase adjustment range is -32
~ 31.
5 Press ENTER.
6 Press
or
adjustment you want, then press ENTER.
7 Repeat Steps 4 and 5 with the other settings
until the picture is correct, then press
ENTER.
To reset the screen to factory settings:
1 Press MENU, then press
PICTURE.
2 Press ENTER. The PICTURE menu opens.
3 Press
or
then press ENTER. The SCREEN menu
opens.
4 Press
or
ENTER.
5 Press
or
ENTER. The position, size, and phase
adjustments return to factory settings. This
feature only works in RGB-PC mode.
or
or
to make the
or
to select
to select SCREEN (RGB-PC),
to select Reset, then press
to select YES, then press
www.insignia-products.com

Using your TV

Turning the TV on and off

To turn your TV on and off:
1 Press POWER
the front of your TV, or POWER
CH+ or CH-, or a number button (0~9) on the
remote control. The POWER/STANDBY
indicator turns blue and your TV turns on.
2 To turn off your TV, press POWER
TV goes to Standby mode and the
Power/Standby indicator turns red.
Note
If you are going to be away for an extended time,
disconnect the power cord from the power outlet.

Changing channels

To change channels:
Press CH
or
CH+ or CH- on the remote control.
To enter a channel number directly:
Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub (minor) channels.
Press the number buttons to enter the main
channel, press the • button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5.2, press 5, press the •
button, then press 2.

Adjusting the volume

You can adjust the volume using the controls on
your TV's front panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound. To restore
the sound, press this button again, or the
VOL+ or VOL-.
, INPUT, CH
or
on
, INPUT,
. The
on the front of your TV or
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ns-pdp50-09

Tabla de contenido