cecotec BOLERO DRESSCODE 7200 Manual De Instrucciones página 35

ENGLISH
Display (5)
The display shows the settings, estimated time remaining, options, and status messages of
the washing machine. The display will remain on through the cycle.
Fig. 23.
Fig. 23.1
Selectable options
Delay start (1)
To set the Delay start function:
1. Select a programme.
2. Press the Delay button to choose the time (the delaying time is 0-24 H.).
3. Press Start/Pause to activate the delay operation.
To cancel the Delay start function:
1. Press the Delay button until the display be shows 0H. It should be pressed before starting
theprogramme.
2. If the programme has already started, switch off programme to reset a new one.
Temperature (2)
Press this button to select the desired temperature (Cold, 20 ºC, 30 ºC, 40 ºC, 60 ºC, 90 ºC).
Speed (3)
Press this button to select the desired speed. 0-400-800-1200-1400.
Function (4)
Use this button to select the desired option: Pre-wash, Extra-rinse, Extra-wash, Night wash
or Anti-crease.
Child lock
- Hold down buttons (2) and (3) for 3 seconds, the device will beep indicating the Child lock
function is activated. This function is designed to prevent children from misusing the
appliance.
- When the Child lock is activated and a programme starts, the Child lock indicator will
switch on, and the CL and remaining time on the display are alternately displayed.
- Every time a button is pressed, the Child lock indicator will flash for 3 seconds.
- When a programme finishes, END will be displayed for 10 seconds. Then, the Child lock
light will flash for 3 seconds.
- To cancel the Child lock function, hold down both buttons for 3 seconds again.
- The "Child Lock" will lock all buttons except for the Power button and the Child Lock button.
68
- Deactivate the Child lock function before selecting a programme and starting washing.
Favourites
Hold down the speed button for 3 seconds when a washing programme is running in order to
save it to your favourites. The default programme is cotton.
Last saved
For the convenience of the users, this programme remembers the washing programme and
function used for the last time. When this programme is selected, the device will run the
programme and options saved to the memory automatically.
Silence
Select this programme to mute the washing machine. Hold down button 1 for 3 seconds, this
setting will remain active until it is restarted. To activate the sound again, hold down the same
button for 3 seconds.
Display settings
Fig. 24
These options will light up when selected for a washing cycle.
Pre-wash (1)
The Pre-wash function is used to perform an extra-wash before the main wash cycle. It is
suitable for washing the dust on the surface of the clothes.
Extra rinse (2)
The laundry will undergo extra rinse once after you select it.
Door lock (3)
Child lock system activated (4)
Time and speed (5)
Cycle Default
temperature (ºC)
Wash cycles
Cotton 40
Express 15' Cold
Rapid 45' 20
60´ Wash 30
ECO 40-60 --
BOLERO DRESSCODE 7200 / 7200 STEEL / 8200 / 8200 STEEL
ENGLISH
Default spin speed Additional functions
in rpm
1000
800
800
1000
1400
69