EAS ELECTRIC ECRTH2 Manual De Instrucciones página 102

Do not install the unit in a place vulnerable to leakage of
flammable gases.
Once flammable gases are leaked and left around the wired
controller, fire may occure.
The wiring should adapt to the wired controller current.
Otherwise, electric leakage or heating may occur and result in
fire.
The specified cables shall be applied in the wiring. No external
force may be applied to the terminal.
Otherwise, wire cut and heating may occur and result in fire.
Do not place the wired remote controller near
the lamps, to avoid the remote signal of the
controller to be disturbed. (refer to the right
figure)
CAUTION
37
V.1