EAS ELECTRIC ECRTH2 Manual De Instrucciones página 114

8.1.1 Mapping of registers in the wired controller
The following addresses can use 03H, 06H (write single register),
10H (write multiple register)
Register Description
address
0
Power on or off.
(PLC:40001)
Remarks
BIT15 Reserved
BIT14
Reserved
BIT13 Reserved
BIT12 Reserved
BIT11 Reserved
BIT10
Reserved
BIT9
Reserved
BIT8 Reserved
BIT7 Reserved
BIT6
Reserved
BIT5
Reserved
BIT4 Reserved
0: power off floor heating; 1: power on floor
BIT3
heating;(zone 2) (water flow temperature control)
BIT2
0: DHW(T5S) power off; 1: DHW(T5S) power on
0: power off floor heating; 1: power on floor heating;(zone 1)
BIT1
(water flow temperature control)
BIT0
0: power off air conditioner; 1: power on air conditioner;
(zone 1) (room temperature control)
49
V.1