Other Precautions; Wired Controller - EAS ELECTRIC ECRTH2 Manual De Instrucciones

7.2 Other Precautions

7.2.1. Installation location
Do not install the unit in a place with much oil, steam, sulfide gas.
Otherwise, the product may deform and fail.
7.2.2 Preparation before installation
1) Check whether the following assemblies are complete.
No. Name
1

Wired Controller

Cross round head wood
2
mounting screw
Cross round head
3
mounting screw
4
Installation and Owner's Manual
5
Plastic bolt
Plastic expansion pipe
6
Qty.
Remarks
1
For Mounting on the Wall
3
For Mounting on the
2
Electrical Switch Box
1
This accessory is used when
2
install the centralized control
inside the electric cabinet
For mounting on the Wall
3
38
V.1