Starting Procedure; To Attach Spent Mandrel Container - Gesipa AccuBird Pro AV Instrucciones De Manejo

GB
• Never use tor store he blind riveting tool is damp/wet environments or in proximity to
flammable liquids and gases (risk of explosion!) and store protected against frost.
• Ensure that the battery is properly secured in the grip.
• Remove the battery when the blind riveting tool is not in use and for repair/servicing
operations.
• The battery may only be charged in the temperature range between 0°C and +50°C.
• Do not use the blind riveting tool as a hammer.
• Keep device, battery packs and charger away from children.
• Depending on the working arrangements, personal protective equipment (PPE) is recom-
mended (e.g. protective clothing, gloves, safety helmet, non-slip shoes, hearing protec-
tion or fall protection).
• The air inlets for the motor must not be obstructed; do not insert any objects into them.
• When setting the blind riveting tool down, make sure that it cannot fall.
• Use only genuine spare parts for repair.
• Repairs must be carried out only by skilled personnel. In case of doubt, always send the
blind riveting tool back to the manufacturer.
• Container complete (I) must always be screwed on when operating the blind riveting tool.
1.6

Starting procedure

Caution:
Fully charge the battery before using for the first time!
• Insert fully charged battery in correct position into housing.
• Select correct nosepiece (A) according to table 1.4.
• To screw in the nosepiece (A), activate the trigger (H) and proceed until the stop position
has been reached at the back.
• Then remove the battery. Screw in the nosepiece (A) and tighten it using the wrench
provided. Put the battery back in and activate the trigger (H).

1.6.1 To attach spent mandrel container

• Fully screw on spent mandrel container (I) by turning clockwise.
20