Setting The Buzzer Volume - Waeco ASC 6300 G LE Instrucciones De Uso

EN
4. Use the cursor key
5. Press ENTER
6. Enter the password
7. Use the cursor keys
8. Press ENTER
9. Press STOP .
The language chosen is active and the standby menu is displayed.
12.4 Setting the font
1. Press the cursor keys
2. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER
4. Use the cursor key
5. Press ENTER
6. Enter the password
PAR
Mingliu
Unifont
ENTER-OK
7. Use the cursor keys
• Unifont
• Mingliu
8. Press ENTER
9. Press STOP
.
The font chosen is active and the standby menu is displayed.
12.5

Setting the buzzer volume

1. Press the cursor keys
2. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER
4. Use the cursor key
5. Press ENTER
6. Enter the password
PAR
Loud
Quiet
ENTER-OK
7. Use the cursor keys
8. Press ENTER
12
to select Service.
to confirm.
.
5264
or to select the preferred language.
to confirm.
or to acces the basic menu.
to confirm.
to select Service.
to confirm.
.
3667
or to select the desired font.
to confirm.
or to acces the basic menu.
to confirm.
to select Service.
to confirm.
.
2899
or to select the desired volume.
to confirm.
or to select Other selections.
FONT
or to select Other selections.
Buzzer