Programming Start/Stop - Poolex SILVERLINE Manual De Usuario Y De Instalación

4.5

Programming Start/Stop

This function is for programming the Start/Stop timing. You can programme up to 3 different Start/Stop timings. Setting
is as follows:
Step 1: Select the programme to be configured,
- Press twice to select programme 1.
- Press 3 times
- Press 4 times
Step 2: Press to programme the start time.
Step 3: Adjust the hours with the buttons
Step 4: Press to switch to minutes.
Step 5: Adjust the minutes with the buttons
Step 6: Press to programme the stop time.
Step 7: Adjust the hours with the buttons
Step 8: Press
to switch to minutes.
Step 9: Adjust the minutes with the buttons
Step 10: Press to validate the programme.
Step 11: Press to return to the main screen.
Refer to the following section to activate the programme
Step 1
x2
Step 5
Step 9
4. Use
to select programme 2.
to select programme 3.
and .
and
and .
and
Step 2
Step 6
Step 10
.
.
Step 3
Step 7
Step 11
x3
22
NB: The remote control
returns automatically to
the main screen after 10
seconds.
Step 4
Step 8