Status Values And Advanced Settings - Poolex SILVERLINE Manual De Usuario Y De Instalación

4.8 Status values and advanced settings

WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
The system's settings can be checked and adjusted via the remote control by following these steps
Step 1: Keep pressing
Step 2: Press several times
Step 3: Press to select the setting to be modified.
NOTE. Some settings cannot be modified. Consult the settings table for further information.
Step 4: Press and
Step 5: Press to set the new value.
Step 6: Press and
Step 1
4 sec
Step 4
4. Use
until you enter the settings verification mode.
to reach the setting to be adjusted .
to adjust the setting value.
to return to the main screen.
Step 2
Step 5
24
Step 3
Step 6