Attaching Other Accessories; Attaching The Fall Prevention Wire; Attaching The Wiring Covers; Attaching Tension Wires - Sony PSS-650P Manual De Instalación

Attaching Other
Accessories

Attaching the Fall Prevention Wire

Install an anchor point and attach the supplied fall
prevention wire to make sure the projector cannot fall.
For details about attaching the fall prevention wire, refer
to the PSS-650 Projector Suspension Support manual.
Notes
• The length of the supplied fall prevention wire
supports the maximum height when using the
extension pipe. After adjusting the height, adjust the
length of the wire to suit the adjusted height.
• If the supplied wire is insufficient, use a wire made of
rust-proof material (for example, stainless steel).
• Use a gage of wire that has sufficient tensile strength
to support the weight of the projector and brackets.

Attaching the Wiring Covers

When finished running cables, insert the wiring covers
into the outer pipe/inner pipe.
For details about running cables and attaching the wiring
covers, refer to the PSS-650 Projector Suspension
Support manual.

Attaching Tension Wires

If the length of the pipe is long, the projector is more
susceptible to swinging. It is recommended that the
PSS-650 Projector Suspension Support be secured using
swing-prevention tension wires.
Attach the bracket for tension wires to the PSS-650
Projector Suspension Support.
For details about attaching tension wires, refer to the
PSS-650 Projector Suspension Support manual.
Wires and anchor points are to be prepared by the
customer.

Specifications

Item Description
Mass Approx. 2.2 kg (19 lb.)
Dimensions Approx. 51 mm × 695 mm × 58.5 mm
(width / height / depth) (2 in. × 27
Design and specifications are subject to change without
prior notice.
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Attaching Other Accessories / Specifications
3 5
/ in. × 2 / in.)
8 16
13