Greenlee PDMM-10 Manual De Instrucciones página 15

All manuals and user guides at all-guides.com
Maintenance (cont'd)
Battery and Fuse Replacement (cont'd)
If the symbol appears in the display, replace the battery.
1. Disconnect the unit from the circuit and turn the unit off.
2. Remove the unit from the case, carefully pulling the top out
first.
3. With the unit lying face down on a flat surface, insert the tip
of a probe in the hole just above the battery cover.
4. While gently pressing down, move the top of the probe
towards the top of the unit, prying the cover open.
5. Remove the back cover.
6. Replace the battery (observe polarity) and/or fuse.
7. Replace the cover.
8. Insert the unit into the case, starting with the bottom.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent;
do not use abrasives or solvents.
PDMM-10
15