Parts Description; Assembly - Makita UB401MP Manual De Instrucciones

WARNING:
Use of this product can cre-
ate dust containing chemicals which may
cause respiratory or other illnesses. Some
examples of these chemicals are com-
pounds found in pesticides, insecticides,
fertilizers and herbicides.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.

PARTS DESCRIPTION

3
► 1. Cap 2. Pipe 3. Front nozzle

ASSEMBLY

WARNING:
Before assembling or
adjusting the equipment, switch off the
motor or engine and remove the spark plug
cap or battery cartridge. Otherwise, the fans
may move and result in an injury.
WARNING:
When assembling or adjust-
ing the equipment, always put it down.
Assembling or adjusting the equipment in an
upright position may result in serious injury.
WARNING:
Follow the warnings and
precautions in the chapter "SAFETY
WARNINGS" and the instruction manual of
the power unit.
1
2
8 ENGLISH
Mounting the attachment pipe
CAUTION:
Always check that the
attachment pipe is secured after instal-
lation. Improper installation may cause the
attachment falling off from the power unit and
cause personal injury.
Mount the attachment pipe to the power unit.
1. Remove the cap from the end of the pipe.
► 1. Pipe 2. Cap
NOTICE:
Do not dispose of the cap
since the cap is necessary for storing the
attachment.
2.
Turn the lever toward the attachment.
► 1. Lever
1
2
1