cecotec BOLERO DRESSCODE TOP 80 INVERTER Manual De Instrucciones página 80

ENGLISH
Before washing
Fig. 12
1. Plug the appliance.
2. Open the tap.
3. Load the washing machine.
4. Add detergent.
5. Close the drum door.
6. Close the washing machine door.
Note
Add detergent in the compartment I if you have selected the pre-wash function.
-
Make sure the drum flaps are correctly locked. Fig. 13
-
All metal hooks must be securely hooked inside the flap of the rear door. Fig. 14
-
Check the drum before each wash, it should roll smoothly.
-
Washing
Fig. 15
1. Turn on the washing machine.
2. Select a programme.
3. Select an additional function or do not modify the default settings.
4. Press the Start/Pause button to start the programme.
Note
If any of the default options is selected, step 3 can be skipped.
After washing
All the lights on the control panel will turn off.
Before each washing
The washing machine must be used in a place where the temperature is between 5ºC
-
and 40ºC. If used under 0°C, the inlet valve and draining system may get damaged. If the
machine is installed at low temperatures, it should be moved to a normal room temperature
to ensure that the water supply hose and drain hose defrost before use.
Check the care labels and detergent instructions before washing. Use non-foaming or
-
less-foaming detergent suitable for machine washing.
Fig. 16
1. Check the care label.
2. Sort laundry by colour and type of fabric.
3. Remove all the objects from the pockets.
4. Knot long textile straps and belts, and fasten zips and buttons.
80