cecotec BOLERO DRESSCODE TOP 80 INVERTER Manual De Instrucciones página 92

ENGLISH
Problem description
The washing machine
does not start
You cannot open the door
Water leakage
Detergent residues in the
box
Indicator or display does
not light
Abnormal noise
Display warnings
Error on the display
E30
E10
92
Possible causes
The door is not closed
properly
The protection system of the
washing machine is active
Poor connection between the
inlet pipe and the drain hose
Detergent is dampened or
agglomerated
The printed circuit board is
disconnected or there is a
connection problem in the
wiring
Cause
Door is not closed properly
Water injecting problem while
washing
Possible solutions
Restart after the door is
closed
Check if there are clothes
stuck
Unplug the device and restart
the product
Check the hoses and connect
them properly
Clean up outlet hose
Clean and wipe the detergent
box
Check if the power is shut
down and the power plug is
connected correctly
Check you have removed the
transport bolts
Check it is installed in a level
and solid surface
Check the washing machine
is level
Solution
Restart after the door is
closed
Check if there are clothes
stuck
Check if the water pressure is
too low.
Check the water supply
hose is not twisted, rolled or
crushed
Check if the inlet valve filter is
blocked