•
Gently brush the remaining hairs away from the trimmer comb and trimmer
blade.
•
Please note, the main body of the trimmer is not washable and should be kept
away from water.
•
After rinsing under a tap ensure the blades are dry.
POP-UP TRIMMER
•
Remove the trimmer comb attachment.
•
Slide up the pop-up trimmer into operating position.
•
Brush hair from the trimmer blades and the surrounding area.
CLEANING CAUTIONS
•
Only the adjustable trimmer comb and cutter assembly may be removed from
the trimmer for cleaning.
•
Cleaning should only be done with a soft brush.
•
Do not use harsh or corrosive cleaners on the units or their blades.
•
This trimmer is not washable. Do not rinse under water.
•
Do not submerge in water as damage will occur.
STORAGE
•
Store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
•
Do not wrap the cord of the charging adaptor around the appliance.
TROUBLESHOOTING
The trimmer does not work when turned on:
•
Trimmer must be charged for a full 14-16 hours. If this does not work, contact
Remington® Service Centre.
Trimmer blades do not move:
•
The cutting unit may be dirty and clogged.
•
Clean and lubricate the unit.
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the mains supply when removing
the battery.
•
Turn the trimmer on and discharge all remaining power.
•
Remove the comb and cutter assembly.
•
Use a screwdriver to pry out the holder plate under the trimmer carefully.
•
Use a screwdriver to pry the two side panels carefully.
•
Remove the 4 screws from the housing.
•
Using a screwdriver carefully pry apart the top and bottom housing.
•
Unscrew the 2 screws on the circuit board.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
AE
7