Operation; Power Connection; The Touch Display; Switching On/Off - Silvercrest SHF 1400 A1 Instrucciones De Servicio

9. Operation

DANGER of burns!
During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet 13 on the back.
Use oven gloves or potholders to touch
the pan 10 and frying basket 5.
During frying, hot steam escapes from
the air outlet 13. Be careful not to put
your hands into the steam.
Do not move or transport the hot air fry-
er while it is switched on.
WARNING! Risk of material damage!
The device must not be operated under
any circumstances without the frying
basket 5!
9.1

Power connection

• When the device is set up, plug the
mains plug 11 into an earthed wall
socket that corresponds to the specifica-
tions on the rating plate. The wall socket
must also be easy to reach after switch-
ing on the device.
- All indications in the touch display 3
light up briefly.
- A double acoustic signal is triggered.
- The symbol for the Start/Stop but-
ton 20 is lit. The device is in stand-
by mode.
9.2

The touch display

On the touch display 3 there are symbols
that only display certain functions, e.g. the
heating symbol 24.
Other symbols (also) represent a button, e.g.
the Start/Stop button
tons' is used in this instructions for buttons and
keys to make the text easier to read.
66 GB
20. The term 'but-
9.3

Switching on/off

• Press the Start/Stop button
switch on the device from standby mode.
- The display 3 shows the program
symbols 14 and the lower bar with
the buttons 18 – 23.
- The set temperature and cooking time
are displayed alternately.
NOTE: if you switch off the device with the
Start/Stop button
switching on, the fan is switched on. It runs
for approx. 1 minute, until the device is
switched to standby mode.
• Press the Menu button
ly to select the desired program.
• Press the Start/Stop button
in order to start the device with the select-
ed settings or the selected program.
- The heating symbol
played.
- The fan symbol
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- The selected program symbol 14
flashes.
• While the device is running, press and
hold the Start/Stop
the process.
- An acoustic signal sounds.
- The fan continues to run and the fan
symbol 25 flashes.
- After approx. 1 minute the fan stops.
The device is in standby mode. Only
the symbol
display 3.
20 to
20 immediately after
23 repeated-
20 again
24 is dis-
25 flashes.
20 button to stop
20 can be seen in the