Cameo LUXIS FC Manual De Usuario página 17

STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Strobe, R, G, B, A, L and C values to be set
directly on the device with values in a similar way to with a DMX controller. In this way, an
individual scene can be created without an additional DMX controller.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Stand Alone and confirm with ENTER, then select Static and confirm once again
with ENTER. Using UP and DOWN, now select the menu item that you wish to edit and confirm
with ENTER. Use UP and DOWN to set the desired value. The strobe effect values correspond to
those in channel 3 of the DMX table 16 CH 16 Bit Direct. Confirm all entries with ENTER.
COLOUR PRESET STANDALONE MODE
49 different colour presets plus 8 individually adjustable user presets (Edit User Colour) are
available. The brightness and a strobe effect can be set at a higher level.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Stand Alone and confirm with ENTER, then select Colour Preset and confirm
once again with ENTER. Now use UP and DOWN to select GEL and confirm with ENTER. The
desired preset can now be selected with UP and DOWN; confirm the selection with ENTER. Use
UP and DOWN to set the desired brightness (Dimmer) and the strobe (Strobe) and confirm with
ENTER. The strobe effect values correspond to those in channel 3 of the DMX table 16 CH 16 Bit
Direct. Confirm all entries with ENTER.
GEL Dark Magenta
|
Rose Pink
User Colour 1
|
User Colour 8
Dimmer 000–100
Strobe 000–255
17