Cameo LUXIS FC Manual De Usuario página 24

Load Default
Store Default
SYSTEM INFORMATION (SYSTEM INFO)
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to
select the menu item System Info and confirm with ENTER.
This will take you to the submenu for accessing the system information (see table, selection with
UP and DOWN, confirm with ENTER, change status with UP and DOWN, confirm with ENTER).
System Info
Firmware = Displays device firmware
Temperature = Displays temperature of LED
Op Hours = Displays operating time
24
= Reset settings
= Store all system settings in
3 individual presets
unit
Factory Reset to factory settings:
Perform reset with ENTER,
cancel with MENU
Reset to Preset A: Perform
reset with ENTER, cancel
Preset A with MENU
Reset to Preset B: Perform
reset with ENTER, cancel
Preset B with MENU
Reset to Preset C: Perform
reset with ENTER, cancel
Preset C with MENU
Preset A Store with ENTER
Preset B Store with ENTER
Preset C Store with ENTER
Main CPU
V1.xx
Temperature LED xx°C / xx°F
Temperature unit °C (= display in
degrees Celsius)
°F (= display in
degrees Fahrenheit)
Op Hours xx:xxh Displays total operating
time in hours and
minutes