1/2" Flat Head Screw; Pull - Sauder 430877 Instrucciones De Montaje

Step 20
å
Carefully stand your unit upright.
å
Pull out the SLIDE portion of the EXTENSION RAILS
and SLIDES, and set the DRAWER on the brackets of
the SLIDES.
å
Fasten the DRAWER to the SLIDES. Use four
1/2" FLAT HEAD SCREWS (9) through the brackets and
into the bottom edges of the DRAWER SIDES (O and P).
Page 24
Both SLIDES should
be against the
DRAWER FRONT.
O

1/2" FLAT HEAD SCREW

www.sauder.com/service
9
(4 used in this step)
Hey! It's starting to look
like something!
P
430877