Princess 01.182080.01.001 Manual De Usuario página 7

Ocultar thumbs Ver también para 01.182080.01.001:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Airfryer rack
The airfryer rack is designed so you can use it for both large and
small portion.
If you have a large portion of food, fold in the legs of the rack.
For small portions of food, unfold the legs of rack.
Steam mode
Turn the stopper to open the water tank.
Fill the water tank with water. Always filled with pure water is a
better solution to delay a lime scale generating than tap-water.
Make sure to properly secure the stopper. Place the water tank
back into the device.
Select the steam function by using the manual program. The
temperature will be set automatically to 100°C.
When the product is in steam mode, you cannot adjust the
temperature.
Place your ingredients into the baking pan.
Set the amount of time you want to steam your ingredients by
using the time control buttons.
Press the power button to start the program.
You can use the steam mode to steam various types of food.
Water injection
When during steaming the water tank runs empty, this indicator
light will start to flash and an alarm will go off.
You can refill the water tank and put it back into place. The light
will stop flashing and the alarm will stop.
If the water tank is short of water for more than 2 minutes, the
device will automatically stop working.
Air fry mode
Place ingredients into the baking pan.
Select the Air fry mode by using the manual function.
Press the manual button to manually set the desired temperature
and time by using the control buttons.
You can also set on of the pre-programmed modes. See 'Airfryer
programs' to select the right program.
Press the power button to activate the program.
When you hear the timer beep, the set preparation time has
elapsed. The device will shut off after 20 seconds. Pull the pan
out of the device and place it on a heat-resistant surface.
Instruction manual
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido