ELICA KIT0179547 Guía De Instalación, Uso Y Mantenimiento página 10

C
B
A
A. Screw with lock washer
B. Mounting hole in motor mounting plate
C. Clip nut
6 Slide the mounting plate support (A) into the shell over the
side supports.
B
A
7 Replace the mounting plate support to the side supports
and fix with the previously removed 4 screws and the
additional 5 - 4.2 x 8 mm screws contained on the
hardware bag.
8 Replace the shell cover and fix with the previously removed
10 screws and the additional 5 - 4.2 x 8 mm screws
contained on the hardware bag.
10
9 Attach power cord connector from the range hood to
connector on wiring box.
A
B
A. Wiring box connector
B. Power supply connector from range hood
For models ELN136S2, ELN142S2, ELN148SS, ELI136S2 and
ELI142S2
1 Unscrew the 4 - 4.2 x 8 mm screws (A) from the mounting
plate support and save them for later.
A
2 Fix support bracket and spring tab, support brackets to the
appropriate screw slots following the next image.