ELICA KIT0179547 Guía De Instalación, Uso Y Mantenimiento página 9

5 Remove cover of the shell.
For models EAR134S4, EAR140S4, EAR146S4, ECL136S4,
ECL142S4, ECL148S4, ETR134S1 and ETR146SS
1 Unscrew the 4 - 4.2 x 8 mm (A) screws from the mounting
plate support and save them for later.
A
2 Fix support bracket (A) and spring tab (B), support
brackets to the appropriate screw slots following the next
image.
A
B
3 Place nuts over the top of the shell on the right slots
4 Slide halfway the mounting plate of the blower motor
assembly, from the front of the shell, gently over the
mounting plate support.
C
A
A. Mounting plate
B. Spring tab
C. Wiring connection
5 Push the right end of the motor mounting plate up and
snap it into the spring tab.
NOTE: The spring tab should be outside the slot in the
mounting plate. Align mounting holes in motor mounting
plate with motor mounting clip nuts and install 4 - 6 x 16
mm screws with clip nuts.
A
A
A. Nuts
A
B
9