Sauder 424192 Instrucciones De Montaje página 20

Step 16
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to make needed adjustments.
å
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both vertical adjustment screws. Move the DOORS up or down to the
å
desired location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed.
å
Tighten the mounting screw after making adjustments.
Page 20
Mounting screw (depth)
(vertical adjustment)
424192
Adjusting screw (horizontal)
www.sauder.com/services