Intended Use - STERWINS ECS2-35.3 Manual De Instrucciones

1.INTENDED USE

1.This electric chain saw ECS2-35.3 is designated with a rated input of 2000 Watts. The
product is intended cutting logs with a thickness of max. 350 mm. It must not be used for
cutting other materials, such as plastic, stone, metal or wood that contains foreign objects.
2. The product may only be used with the guide bar/saw chain combination stated in these
instructions. Do not use other types or sizes.
3. Vertical and horizontal cuts can be performed with this product. Longitudinal sections can
only be cut by professionals.
4. Do not use the product outside of domestic premises e.g. for cutting firewood in
EN
forested areas.
5. This product is intended for private domestic use only, not for any commercial trade use. It
must not be used for any purposes other than those described.
6. The maximum permissible system impedance is (0.339Ω) at the interface point
of the user's supply. The user should determine in consultation with the supply authority, if
necessary, that the equipment is connected only to a supply of that impedance or less.
52