Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Power failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if
you minimize the number of times the door is opened. If the power is going to be off for a longer period of time,
you need to take the proper steps to protect your contents.
Moving your wine chiller
− Remove all items (bottles)
− Tape down securely all loose items (shelves) inside your appliance.
− Turn the adjustable leg up to the base to avoid damage.
− Tape the door shut.
− Be sure the appliance stays secure in the upright position during transportation. If you absolutely need to
transport the chiller horizontally, transport the chiller on its back (door on top). Also protect outside of appliance
with a blanket, or similar item.
Energy saving tips
The wine chiller should be located in the coolest area of the room, away from heat producing appliances, and out
of the direct sunlight.
Charcoal filtration system
Your wine is a living object that breathes through the cork of its bottle. In order to preserve the quality and taste
of your fine wines, they must be stored at the ideal temperature and ambient conditions. Your cellar is equipped
with an active charcoal filtration system to ensure air purity, cooling efficiency, and to maintain an odor free
cabinet for the storage of your fine wines. The filter assembly is located at the rear panel inside your cellar.
Keep in mind, that this filter must be changed every 12 months.
1
Remove the bottles of wine stored on the two (2)
shelves in front of the filter.
2
Remove the shelves and set aside to be replaced
once you have changed the filter
3
Hold the filter and turn it at 45 degrees in the
counter-clockwise direction and then pull it out.
4
Remove the existing filter and replace with a new
one.
5
Put the new filter into the hole and then turn the
filter at 45 degrees in clockwise direction.
Turn Left to remove filter.
4
Publicidad
Tabla de contenido
Solución de problemas
