Cleaning And Maintenance; Important - universalblue UBE2400-20 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7.

CLEANING AND MAINTENANCE

What?
How?
Everyday
1. Switch the power to the cooktop off.
soiling on glass
2. Apply a cooktop cleaner while the glass is
(fingerprints,
still warm (but not hot!)
marks,
stains
3. Rinse and wipe dry with a clean cloth or
left by food or
paper towel.
non-sugary
4. Switch the power to the cooktop back on.
spillovers
on
the glass)
Boilovers,
Remove these immediately with a fish slice,
melts, and
palette knife or razor blade scraper suitable for
hot
sugary
Induction glass cooktops, but beware of hot
spills on
cooking zone surfaces:
the glass
1. Switch the power to the cooktop off at the
wall.
2. Hold the blade or utensil at a 30° angle and
scrape the soiling or spill to a cool area of the
cooktop.
3. Clean the soiling or spill up with a dish cloth
or paper towel.
4. Follow steps 2 to 4 for 'Everyday soiling on
glass' above.
Spillovers
on
1. Switch the power to the cooktop off.
the
2. Soak up the spill
touch controls
3. Wipe the touch control area with a clean
damp sponge or cloth.
4. Wipe the area completely dry
with a paper towel.
5. Switch the power to the cooktop back on.

Important!

• When the power to the cooktop is
switched off, there will be no 'hot
surface' indication but the cooking zone
may still be hot! Take extreme care.
• Heavy-duty scourers, some nylon
scourers and harsh/abrasive cleaning
agents may scratch the glass. Always
read the label to check if your cleaner or
scourer is suitable.
• Never leave cleaning residue on the
cooktop: the glass may become stained.
• Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety cover
is retracted, the blade in a scraper
is razor-sharp. Use with extreme
care and always store safely and
out of reach of children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you wipe the
touch control area dry before turning the
cooktop back on.
47

Publicidad

Tabla de contenido
loading

Tabla de contenido