Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Britax Child Safety, Inc.
5. Position the harness
straps around the child
(see page 21).
NOTE: Adjust the harness
to fit the clothes the child
is wearing. Remove bulky
coats, jackets and/or
bulky sports equipment
before putting the child in
the child seat.
6. Fasten the harness buckle.
Proper connection is
confirmed with a click
after inserting each buckle
tongue.
7. Pull the harness adjuster
strap to tighten the
harness.
NOTE: The harness
should have a snug fit
around the child. A snug
strap should not allow any
slack. It lies in a relatively
straight line without
sagging. It does not press
on the child's flesh or
push the child's body into
an unnatural position.
You should not be able to
pinch excess.
8. Fasten the chest clip and
place at armpit level.
Before traveling, verify that the:
9 Harness straps are not twisted.
9 Harness is snug.
9 Buckle is fastened.
9 Chest clip is at the child's armpit level.
9 Remove bulky coats, jackets and/or bulky sports equipment
before putting the child in the child seat.
18
Pull the harness adjuster
away from the child seat
(parallel to the ground) to
tighten.
Do not pull sideways.
Table of Contents
Publicidad
Tabla de contenido
