TECNOMOTOR TM 514 Manual De Instrucoes página 55

TM 514 – COMMON RAIL TEST
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
Injuries
Beware the tightness of hydraulic connections. The steel tub can cut in case of
sudden movements of the arm or in the case of the key escape the tightening of
the connection.
The maximum torque required for tightening the connections is 30 N.M, it is
advised to use a torque controlled wrench to tighten the connections. The
following example of tachometer wrench.
The equipment has rotating and moving parts that can cause injury to hands and
arms.
The heat radiator fan may work unexpectedly.
For the test system is a risk to the connection cables and the power grid.
Materials and objects in inappropriate places can also jeopardize the safety of the
operator.
- Prevention
• Tighten connections carefully. The backs of high-pressure connections are all
tapered to reduce the need for great grip, making it easy to seal.
• Do not touch parts with equipment running.
• Do not use the equipment with the side covers open.
• Install electrical cables in order to prevent them from getting in the way.
Anyone can end up tripping.
149