TECNOMOTOR TM 514 Manual De Instrucoes página 96

TM 514 – COMMON RAIL TEST
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
Connecting the sensor to the equipment
The pressure sensor is connected to the device through an adapter and uses two
connections: the electrical connection and the high pressure connection.
To illustrate, we will use a Bosch sensor with a maximum pressure of 2000 bars,
together with its proper accessories.
1 - Bosch pressure sensor
2 - Electrical connector
3 - Pressure Adapter
Important: Tighten the hydraulic connections carefully to avoid damaging
the adapter threads. The backrests of the adapters are all tapered,
facilitating sealing and requiring less effort when tightening.
After installing the sensor on the TM 514, press the "F7 - Start" button.
The screen below will appear.
Press the "F7 - Start" button or wait for the automatic start.
190