Important - Furrion VISION S FOS07TASR Manual De Usuario

Install and Use Monitor
Install the monitor
IMPORTANT: Choose a monitor location
in your vehicle that does not block your
view and complies with local laws for safe
driving. Do not place in an area where it might
interfere with driving.
1. Clean the mounting area and remove the
protective film from the suction cup of the
windshield stand. Then place the suction
cup onto the appropriate location and
push the locking arm downwards to stick
securely.
2. Align the ball on the bracket with the
opening on the back of the monitor and
push firmly to lock into place.
3. Connect the cigarette lighter connector
of the monitor power cable to a cigarette
lighter socket.
CCD-0005559 Rev: 04-29-22
4. Connect the DC connector to the power
socket on the monitor.
5. Rotate the monitor to adjust the visual
angle as needed.
To remove the suction cup:
1. Lift up the locking arm.
2. Pull the tab on the suction cup away from
the windshield to allow air in then you can
remove the suction cup easily.
- 13 -