Important Safety Instructions; Electrical Safety - Furrion VISION S FOS07TASR Manual De Usuario

Important Safety Instructions

Generic safety instructions
READ THESE INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR
USING THE SYSTEM
When used as an observation system, this
product is intended to assist in safe driving
and to allow the driver to have a broader view.
Do not back up your vehicle while watching
the monitor screen. Always look in the
direction the vehicle is traveling.
Use the monitor as an aid to ensure there are
no children or obstructions. The image on
the monitor is not designed to show distance
and may be misleading. The actual distance
is less than what appears in the monitor. The
range of the image is limited. Be aware of
blind spots.
You, as the driver, are solely responsible for
the safe operation of your vehicle and the
safety of your passengers according to your
local traffic regulations.
Do not use any features of this system to the
extent it distracts you from safe driving.
Your first priority while driving should
always be the safe operation of your vehicle.
Furrion cannot accept any responsibility for
accidents resulting from failure to observe
these precautions or safety instructions.
1. This product utilizes high voltage. Any
unauthorized modifications or damage to
the product may result in electrical shock.
Handle all components with care. Inspect
regularly for damage to components and
cabling.
2. You are responsible for ensuring the
installation of this product does not void
or affect the vehicle manufacturer's
warranty. Furrion is not liable in full or in
part for improper installation resulting
in loss or damage to your property,
or for voiding all or part of the vehicle
manufacturer's warranty.
3. Do not apply excessive force to any of
CCD-0005559 Rev: 04-29-22
the components contained within this
kit. Excessive force used before, during
or after installation that results in a
damaged or nonfunctional part will void all
warranties.
4. Please follow the procedures in this
instruction manual. Improper installation
or modification of this product will void all
warranties.
Many jurisdictions have laws and regulations
relating to the use of cameras and some do
not allow for the obstruction of information
contained on a license plate. Before using this
product, it is the buyer's responsibility to be
aware of and comply with any applicable laws
and regulations that apply to license plates or
may prohibit or limit the use of cameras.

Electrical Safety

● Ensure all power sources are isolated
before installation.
● Insulate unconnected wires with vinyl
tape or similar.
● Use insulated tools when working with a
power supply.
● For EU countries:
− The Vision S product shall be powered by
12V or 24V external power supply, with
a properly sized fuse or breaker (5A for
12V or 3A for 24V) mounted between the
product and power supply.
The external power supply used with
−
this product shall comply with the LPS
(Limited Power Source) requirements or
shall be a Power Source Class 2 (PS2)
with less than 100W.
Caution
● There are no serviceable parts in the
Furrion® Vision S Camera System. Do not
disassemble or attempt any repairs.
● Install external fuses/breakers as
required.
- 4 -