Furrion VISION S FOS07TASR Manual De Usuario página 15

Install and Use Monitor
The monitor in a wireless system is
−
always watching for a video signal when
it is off. Signals from other wireless
camera systems may cause interference.
For example, security cameras, baby
monitors, and even other backup camera
systems can also trigger the monitor to
briefly light up. This is normal for wireless
products.
Change Menu Settings
There are four menu options that allow you to
set up the wireless rear observation system
before operation.
Camera Setting
Use / to highlight the SETUP menu,
then press to enter the next page or press
to return to the previous page.
CCD-0005559 Rev: 04-29-22
Mirror Setting
to highlight the MIRROR
1. Use /
menu, then press
2. Press /
NORMAL (0o), ROTATE (180o), FLIP
(Horizontal Mirror) or FLIP & ROTATE
(Vertical Mirror). Press
selection or press
previous page.
Volume Setting
1. Use / to highlight the
VOLUME menu, then press
- 15 -
to enter it.
to set the camera image as
to confirm your
to return to the
to enter it.