Active Vibration Reduction - Hilti NURON TE 60-22 Manual De Instrucciones Original

3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless SDS­Max rotary hammer drill with pneumatic hammering mechanism.
It is designed for drilling in concrete, masonry, wood and metal. The product can also be used for light- to
medium-duty chiseling on masonry and surface finishing work on concrete.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Undercut anchors
The product is suitable for setting selected undercut anchors. Use only suitable setting tools!
For more information contact Hilti Service.
3.4 ATC 2
The product is equipped with the ATC (Active Torque Control) quick-acting electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about its own axis in the opposite direction.
ATC detects this sudden pivoting movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.
3.5

Active Vibration Reduction

The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.6 Service indicator
The product is equipped with a service indicator LED.
3.6.1 MMI
Status
The Service indicator lights up.
The Service indicator flashes.
The ON/OFF indicator lights up.
*2267486*
1
2267486
Chuck
@
Depth gauge adjustment (accessory)
;
Depth gauge (accessory)
=
Function selector switch
%
Lock button for continuous chiseling opera-
&
tion
Control switch
(
Battery
)
Battery release button
+
Battery status indicator
§
Side handle
/
On/off switch
:
Button for half power
∙
Half-power indicator
$
Service indicator
£
ON/OFF indicator
|
Meaning
Servicing is due.
Have the product repaired by Hilti Service.
The product is switched on
English 21