Getting Started; Bt In Mode; Aux In Mode - auna Berklee TT-Classic Manual De Instrucciones

EN
20

GETTING STARTED

1. Place the speakers on a flat and level surface. The chosen location
should be stable and free from vibrations.
2. First connect the mains cable to the unit and then connect the power
supply unit to the mains socket.
3. Turn the on/off volume control on the unit to switch the unit on and off.

BT IN MODE

1. Turn the mode knob to BT IN. The mode indicator turns blue and
flashes.
2. Switch on the BT function of your audio device or mobile phone Search
for "Berklee" in the BT device list and pair your device with the record
player.
3. Once your device is successfully connected to the speakers, you will
hear a short confirmation tone from the speakers and the function
indicator will light up blue.
4. Play and stream music from your device to the speakers.

AUX IN MODE

Turn the function knob to AUX IN. Connect a 3.5 mm audio cable (not
included) to the AUX IN jack of the speaker and the other end to the output
jack of your audio device (mobile phone/MP3 player). Now you can play
music from your external device.