On Safety Grounds, Only Original Gardena Spares; Accessories; Technical Data - Gardena 4025 Manual De Instrucciones

Repairs :
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.

10. Accessories

GARDENA
Replacement Battery
Li-Ion 25 V

11. Technical Data

Type
Cutting width / Cutting height
Cutting height adjustment
Weight with Accu
Accu Voltage / capacity
Lawn area per Accu-charge
Working area related emission
characteristic value L
Noise level L
WA 2)
Vibrations a
vhw 1)
Measuring method 1) according to EN 836 2) according to RL 2000 /14 / EG
O 9. Cutting test :
Place a strip of paper
that it points towards the spindle of the cylinder
S
10. Turn cylinder
If the lower blade is set correctly
the paper will be cut off as if with scissors.
P
11. Repeat the cutting test on the other blades

On safety grounds, only original GARDENA spares

may be used.
A
Please contact GARDENA Service if it is necessary to replace
the cutting tool, which will only become blunt after several years
use if well-maintained.
Have the cylinder mower checked over in the autumn if possible
so that it is ready for use immediately when the next lawn-mowing
season starts.
The long-lasting, reliable power source
for increased cutting capacity, ideal for
larger lawns of more than 400 m².
380 Li (Art. 4025)
38 cm / 12 - 42 mm
infinitely variable
13.6 kg
25.2 V / 3.2 Ah
Up to 400 m
70 dB (A)
1)
pA
measured 85 dB (A) / guaranteed 86 dB (A)
< 2.5 m / s
2
S
in such a way on the lower blade
O
carefully.
2 (see 4. Function)
O
.
P
O
.
Art. No. 8838
P
21