Teka RVI 460 Manual Del Usuario página 36

The most energy-saving configuration requires shelves to be positioned in the product, please refer to the above
pictures.
Ø Shelves
To prevent damaging the door gasket, make sure to have the door all the way opened
l
when pulling shelves out of the rail compartment.
For easy access to the storage content, you must pull the shelves approximately 1/3 out
l
of the rail compartment, however this unit was designed with a notch on each sides of the
shelf tracks to prevent bottles from falling.
Please refer to the following direction for replace shelf with different method.
When removing any of these shelves out of the rail compartment, to fit or remove the shelf,
tilt the shelf as per the diagram and simply pull out, or push in the shelf until it sits on the
support brackets securely.
Ø Attention of put wine bottle
•
These shelves were designed with concave grooves, tall wine bottles can also be stored cross way
on the wooden shelves.
7