Milwaukee 3624-20 Manual Del Operador página 7

A
33ft
33ft
2. Rotate the laser 90 degrees clockwise around
plumb point (x) and align the left Horizontal dot
with the previously marked point A. With the
laser in position, mark point (III) on wall B at the
intersection of the perpendicular lines directly in
front of the laser. Without moving the laser, mark
point (IV) on wall C using the right horizontal point.
The deviation (d) between points II & III should be
no more than 1/8" at 33'.
A
33ft
33ft
3. Lastly, rotate the laser 180º clockwise around
plumb point (x) so that the right horizontal
point is aligned with the previously marked
point I. Without moving the laser, using the
left horizontal point mark (V) on wall C.
The deviation (d) between points IV & V should
be no more than 1/8" at 33'.
A
33ft
33ft
B
C
33ft
B
C
33ft
B
33ft
WARNING
ing any maintenance. Never disassemble the tool.
Maintain Laser Level
Maintain tools. If damaged, have the tool repaired
before use. Accidents may be caused by poorly
maintained tools.
WARNING
your tool in liquid or allow a liquid to flow inside
them.
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or
combustible solvents around tools.
Blow off loose particles with clean compressed air.
Carefully wipe the surface with a cotton swab moist-
ened with water.
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
WARNING
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
C
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
7
MAINTENANCE
To reduce the risk of injury, always
remove the battery before perform-
To reduce the risk of personal in-
jury and damage, never immerse
Cleaning
Cleaning the Lenses
Repairs
ACCESSORIES
Use only recommended accesso-
ries. Others may be hazardous.
(1.800.729.3878)
www.milwaukeetool.com
1.800.268.4015