How To Determine The Device Version Number In Admin Mode; How To Set The Timeout Lock In Admin Mode - Kingston IronKey Keypad 200 Manual Del Usuario

19. How to Determine the Device Version Number in Admin Mode

To display the device Version Number of the KP200 do the following.
Caution:
Entering the Admin PIN to access a locked drive will clear (delete) the User PIN.
Instructions
1. Unlock the KP200 with Admin PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 8 followed by the
number 6 button - (86)
4. Press the KEY ( ) button once and the following happens;
a. All LEDs (RED, GREEN
b. RED LED blinks indicating the integral part of the firmware revision number.
c. GREEN LED blinks indicating the fractional part.
d BLUE LED blinks indicating the last digit of the firmware revision number
e. All LEDs (RED, GREEN
f. RED, GREEN & BLUE
For example, if the revision number is '1.12.3', the
twelve (12) times and the
& Blue LEDs will blink together once and will then switch to a flickering

20. How to Set the Timeout Lock in Admin Mode

To protect against unauthorized access in the event the KP200 is connected to a host and left unattended,
the KP200 can be set to automatically lock after a pre-set duration of time.
In its default state, the KP200 Timeout Lock feature is turned off. The Timeout Lock feature can be set to
activate (lock) an idle drive anywhere between 1 and 99 minutes. Admin Timeout Lock settings will override
User settings.
To set the Timeout Lock, please follow steps in the next table.
Caution:
Entering the Admin PIN to access a locked drive will clear (delete) the User PIN.
#16 #16
& BLUE) will flash together once.
& BLUE) become solid for 1 second.
LEDs switch to a flickering
Blue LED will blink three (3) times. Once the sequence has ended the Red,
www.kingston.com www.kingston.com
LED LED State
Green LED will flicker indicating successful
Admin PIN entry
Green and
Green and
together
Green LED
Red LED will blink once (1) and the
Green
Blue LEDs flicker together
Blue LEDs continue to flicker
Green LED will blink
LED.
Green