How To Delete All Data In Admin Mode; Brute Force Hacking Detection - Kingston IronKey Keypad 200 Manual Del Usuario

22. How to Delete All Data in Admin Mode

To delete all data stored on the KP200, please follow the instructions below. All Admin settings will remain
on the KP200 but all data will be deleted and cannot be retrieved and the KP200 will have to be reformatted
(see sections 28, 29 or 30).
Caution:
Entering the Admin PIN to access a locked drive will clear (delete) the User PIN.
Instructions
1. Unlock the KP200 with the Admin PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 3 followed by the
number 2 button - (32)
4. Press the KEY button once
5. Enter your Admin PIN
6. Press the Key button once

23. Brute Force Hacking Detection

If both Admin and User PINs have been created and a User enters an incorrect User PIN ten (10) consecutive
times, the KP200's brute force mechanism will trigger and the User PIN will be deleted. All data will remain
on the KP200 and can only be accessed by the Admin entering the correct Admin PIN.
If Admin enters an incorrect Admin PIN ten (10) consecutive times, then both the User and Admin PINs, the
encryption key and all data will be deleted and lost forever.
The table below illustrates the different PIN set-up states and what happens when entering an incorrect Ad-
min or User PIN incorrectly ten (10) consecutive times.
PIN used to unlock
PINs Set-up on
KP200
Admin & User
PINs
Admin & User
PINs
User PIN Only
Admin PIN Only
#16 #18
What happens after 10 consecutive incorrect PIN entries?
KP200
The KP200's brute force mechanism will trigger and the User PIN will
be deleted.
User PIN
All data will remain on the KP200 and can only be accessed by the
Admin entering the correct Admin PIN.
The KP200's brute force mechanism will trigger and both the User and
Admin PIN
Admin PINs, the encryption key and all data will be deleted and lost forever.
The KP200's brute force mechanism will trigger and the User PIN, the
User PIN
encryption key along with all data will be deleted and lost forever.
The KP200's brute force mechanism will trigger and the Admin PIN, the
Admin PIN
encryption key along with all data will be deleted and lost forever.
www.kingston.com www.kingston.com
LED LED State
Green LED will flicker indicating successful
Admin PIN entry
Green and Blue
Green and Blue
together
Green and Blue
and Green LEDs alternating on and off
Red and Green
on and off
Alternating Red
solid Red and
a flickering Green
data has been deleted
LEDs flicker together
LEDs continue to flicker
LEDs will switch to Red
LED continue to alternate
and Green LEDs switch to
Green LEDs and finally to
LED indicating that all