How To Disable The Timeout Lock In Admin Mode - Kingston IronKey Keypad 200 Manual Del Usuario

Instructions
1. Unlock the KP200 with the Admin PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 8 followed by the
number 5 button - (85)
4. Press the KEY button once
5. Enter the length of User Timeout:
0 = 0 minutes (default)
5 = 5 minutes
15 = 15 minutes
99 = 99 minutes etc
6. Press the Key button once

21. How to Disable the Timeout Lock in Admin Mode

To disable the Timeout Lock, please follow steps in the table below.
Instructions
1. Unlock the KP200 with the Admin PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 8 followed by the
number 5 button - (85)
4. Press the KEY button once
5. To disable the Timeout Lock, press button
number 0
6. Press the Key button once
LED LED State
Green
Admin PIN entry
Green
Green
together
Green
blinking
Green
Solid
Green
out has been successfully configured
LED LED State
Green
Admin PIN entry
Green
Green
together
Green
blinking
Green
Solid
Green
out has been successfully disabled
#15 www.kingston.com
www.kingston.com
LED will flicker indicating successful
and Blue LEDs flicker together
and Blue LEDs continue to flicker
and Blue LEDs will switch to a
Green LED
LED continues to blink
Red LED will switch to a flickering
LED indicating the Auto-Lock time
LED will flicker indicating successful
and Blue LEDs flicker together
and Blue LEDs continue to flicker
and Blue LEDs will switch to a
Green LED
LED continues to blink
Red LED will switch to a flickering
LED indicating the Auto-Lock time
#17