Drive Inhibit Indication; Oonapu; The Joystic; Controlling Maximum Speed - Moretti ARDEA MOBILITY VIRGO Manual De Instrucciones

17.3 Drive inhibit indication

Drive inhibit mode is indicated by the battery gauge with a right-to-left
chase sequence.
The chase sequence starts with the green LED on the right-hand side, and
one-by-one, each LED will switch on and then off. When the sequence com-
pletes at the left-most red LED, it begins again at the right-hand side.
The chase sequence continues until the error condition has been cleared.

17.4 OONAPU

OONAPU ("Out Of Neutral At Power Up") is a safety feature that prevents accidental move-
ment of the wheelchair, either when powering up, or when the wheelchair comes out of an
inhibit state.
If the LiNX LE System is turned on (or comes out of an inhibit state) while the joystick is not
in the centre position, an OONAPU warning is displayed. During an OONAPU warning, the
battery gauge LEDs will flash continually to alert the user, and the chair will not drive. If the
joystick is returned to the centre position within five seconds, the warning will clear and the
wheelchair will drive normally.
However, if the joystick remains out of neutral for longer than five seconds, an OONAPU error
will occur; the error is displayed by the Status indicator flashing red, and the chair will not
drive. To clear the error, return the joystick to the neutral position and power the unit off and
then on again.

17.5 The joystic

The joystick controls the direction and speed of the wheelchair.
When the joystick is deflected from the centre position, the wheelchair will
move in the direction of the joystick movement.
The speed of the wheelchair is proportional to the joystick deflection, so
that the further the joystick is moved from the centre position, the faster
the wheelchair will travel.

17.6 Controlling maximum speed

The speed dial allows the user to limit the maximum speed of the wheelchair (that is, the
speed when the joystick is fully deflected) to suit their preference and environment.
The dial offers 10 discrete steps between the lowest speed (dial set to the
left) and the highest speed (dial set to the right).
As a visual reminder, a speed symbol (shown left) is positioned just below
the speed dial to indicate the low and high positions of the speed dial.
19