Allmatic PLUS 24V Manual Del Usuario página 15

M
ECHANICAL STOPPER ADJUSTMENT
To adjust the stoppers you have to follow the scheme (Fig. 11).
To set the opening limit it's enough to fix the stopper (A) in the needed
position by tightening the 8mA screw with a n. 13 key.
To obtain the desired closing limit you must adjust the stopper (B)
(OPTIONAL) in the needed position and tighten it as for stopper (A).
M
AINTENANCE
To be undertaken only by specialized staff after disconnecting power
supply.
Lubricate the hinges and check the oil level and thrust force generated
by the operator on the gate once a year.
Lubricate the nut screw with silicon grease every two years.
COL
Column attachment
PLUS 24V
Z
Y
S1
X
S2
S3
6-1624027 rev. 04 27/01/2014
All manuals and user guides at all-guides.com
YES!
Make sure to fasten
the bolt that fixes
the piston to the
bracket enabling
that this one can
easily rotate.
9
15
15
45
ANT
Leaf attachment
PLUS 24V
A
B
NO!
The piston must
not change its
height during the
different phases
of the mouvement.
10
11
12
Respect the height and
make sure that the piston is
in horizontal position.
ANT PLUS 24V L
Leaf attachment
PLUS 24V L
C
D
13
G
B