Understanding The Display - GE Profile XPIO13BCBT Manual Del Propietário

Care and Cleaning
Cleaning the Bin and Tray
To clean the ice bin, remove the ice bin from the ice maker and clean with a soft cloth dampened with soapy water.
The drip tray should be wiped dry. Water left in this area may leave deposits. To clean the drip tray, remove the tray
use solvents or chemicals.

Understanding the display

Power
The Power button, when pressed, will begin the ice
making process. When pressed, while ON, will turn the ice
Light
Toggle between the three modes by pressing the light but
ton until you reach your desired lighting mode.
Clean
The cleaning cycle is initiated by pressing and holding the
49-1000464 Rev. 6
Do not use solvents or chemicals.
Making Ice Add Water
Defrosting Cleaning
Clean Light
Hold 3 Sec
Defrosting
unit will run a rinse cycle to defrost the ice maker and then
start making ice again.
Indicator Lights
highlighted, your unit needs more water before it can cycle
to make ice or clean.
WiFi
can connect to their Opal and control it from their Android
Do not
Power