Technical Characteristics - PYD Electrobombas PMO Serie Manual De Instalación Y Mantenimiento

OPERATING AND MAINTENANCE MANUAL
PMO SERIES 4" SUBMERSIBLE MOTOR
Thank you for choosing our product. For proper use of the motor, please carefully follow the instructions
below on the installation and use of non-toxic oil-cooled submersible motors.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the motor.

1. TECHNICAL CHARACTERISTICS

Coupling flange according to NEMA standard for 4".
Motor size:
•
Single-phase: 0.37 kW - 2.2 kW
•
Three-phase: 0.37 kW - 7.5 kW
Voltage:
•
Single-phase: 220V ± 10%
•
Three-phase: 220V o 380V ± 10% 50Hz o 60Hz
Protection: IP68
Insulation class: F
2. LIMITS ON USE
It is necessary to respect the following conditions for the correct use of the motor in a deep well 4 ":
1.
Maximum ambient temperature: + 35oC.
2.
Average pH value: 6.5-8.5.
3.
Max. Immersion depth: 50m
4.
The other performance must comply with the technical parameters indicated on the nameplate.
3. INSTALLATION AND WARNINGS
It is necessary to respect the following conditions for the correct use of the motor in a 4" deep well:
1.
Before operation, check for damage, e.g. to cables, plug, etc. during transport. Replace or repair
immediately if damage has occurred.
www.proindecsa.com / proindecsa@proindecsa.com
WARNING!
50Hz o 60Hz
6