–
Route both longer connection cables without tension under
the rear cross brace toward the rear of the vehicle.
–
Position the shorter connection cable in front of the rear
cross brace.
501939-01
–
Mount front rider's seat
–
Plug in the connector on the wiring harness
it properly.
Guideline
Make sure that the cables are not trapped or damaged.
501940-01
Passenger seat assembly
–
Remove screws
–
Remove luggage rack bridge
and tail section
501941-01
1
(included).
2
bo
.
bp
with passenger handles
bq
.
ASSEMBLY 5
and route
11