Dashboard; Multi-Function Button - Segway KickScooter P100SU Manual Del Producto

EN
Handlebar Functions
USB Port
Name Function Operation method
Press the Power Button to power on the scooter. Press and hold to power it off.
Power on/off
* Available only when the scooter is not in Anti-theft mode.
Power Button
Wake up the dashboard Press the Power Button to wake up the dashboard when the dashboard automatically dims.
Mode Switching
Switch between speed modes Press the Mode Switching Button twice to switch mode.
Button
Enabling the cruise mode via the Segway-Ninebot app:
Turn on/off the cruise
mode Press the Multi-function Button to turn on the cruise mode, press again to turn it off.
Turn on/off the headlight Rotate the Multi-function Button clockwise/counterclockwise to turn off/on the headlight.
Multi-function
Rotate the Multi-function Button clockwise/counterclockwise and hold it for 3 seconds to
Turn on/off the adaptive
Button
turn off/on the adaptive headlight feature. * When the scooter is activated, this feature is
headlight feature
turned on by default.
Press the Multi-function Button to confirm the password after entering the password
Confirm the password
with the Direction Indicator Button successively.
USB Port Charging Connect your device to the USB Port for charging.
Press and hold the throttle for 5 seconds to activate ASSIST mode.
Activate ASSIST mode
* Squeeze brake levers to turn it off.
Throttle
Speed up Press and hold the throttle to speed up.
Interact with the NFC card to
Tap the NFC card on the NFC Area to power on/off the scooter.
Power on/off
NFC Area
Interact with the NFC card to
Tap the NFC card on the NFC Area to unlock the scooter.
unlock
Horn Button Turn on the horn Press the Horn Button, the scooter will beep.
Turn on the left/right Press the left/right side of the Direction Indicator Button, the left/right direction indicator
direction indicator will flash, and automatically turns off after 5 seconds.
Direction
Indicator Button Press the left/right side of the Direction Indicator Button (left is minus, right is plus) to enter the
Enter the password
password.
02

Dashboard

Power Button
USB Port Icon
Mode Switching Button
Speedometer
Throttle Temperature Warning
Cruise Mode
NFC Area
Headlight (on)
Horn Button
Headlight (off)

Multi-function Button

ASSIST Mode
Direction Indicator Button
Lock
Adaptive Headlight
Direction Indicator
Symbol Name Meaning Description
POWER Progress Bar The symbol displays the motor output power of the scooter.
Speedometer
The symbol displays the current speed of the scooter.
Enabling the cruise mode via the Segway-Ninebot app:
1) In ECO, DRIVE or SPORT mode, press the Multi-function Button to activate the cruise
mode when the speed ＞ 3.1 mph (5 km/h). Then the scooter will cruise at the current
speed.
The symbol
Note: When the cruise mode is activated, the scooter will beep and the front and rear
Cruise Mode
indicates that
direction indicators will flash once respectively.
the cruise mode
2) Turn off the cruise mode with the following methods:
is activated.
Method 1: Twist the throttle or squeeze brake levers.
Method 2: Press the Multi-function Button.
Method 3: Switch the speed mode.
When the scooter is powered off after 30 seconds:
When the icon
If the scooter is moved or touched by someone, it will enter to Anti-theft mode. At this
flashes, it means
point, the scooter will start beeping and the front and rear direction indicators will flash,
the scooter enters
and the motor will be locked automatically.
Anti-theft mode.
Note: Only available to power on the scooter with NFC card.
When locked via the Segway-Ninebot app or in the unlocking state via password, the
scooter will keep beeping and the tail light will flash.
Unlock the scooter with the following methods:
Lock
1) Press the Power Button to wake up the dashboard, the dashboard will display the digit
When the icon lights
"0" by default, then enter the four-digit password 1-2-3-4 with the Direction Indicator
up, it means the
Button and confirm the password with the Multi-function Button successively.
scooter is locked.
Note: After activating your scooter, enable/disable the unlock with a password feature
via the Segway-Ninebot app and set your password. Otherwise, you cannot unlock your
scooter with a password.
2) Tap the NFC card on the NFC Area.
3) Unlock via the Segway-Ninebot app.
EN
POWER Progress Bar
Walk Mode
PARK Mode
ECO Mode
DRIVE Mode
SPORT Mode
Bluetooth
Warning
Remaining Battery Power
Direction Indicator
NFC Area
03