Dimensional Drawings - Balluff BSP B Serie Manual De Instrucciones

Ocultar thumbs Ver también para BSP B Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

BSP B/M/V _ _ _ - _ _ _ _ _ - _ _ _ A1A - S4(- _ _ _ )
Pressure Transmitter

Dimensional drawings

Process connection
NPT process
per EN 3852
connection
Maintenance / Decommissioning
NOTICE
Damage to the measuring cell
Improper cleaning can result in irreparable damage to the
measuring cell.
► Do not use compressed air or sharp objects for
cleaning!
The device is essentially maintenance-free. The housing
can be cleaned as needed using a damp cloth and non-
corrosive cleaning solution when the device is switched off.
Depending on the measuring medium, deposits or dirt on
the membrane can occur. If this is known, the operator
must define appropriate cleaning intervals. After taking the
device out of service properly, the membrane can be
carefully cleaned using a non-aggressive cleaning solution
and a soft brush or sponge.
CAUTION
Residues
Medium remnants on the device may result in a hazard
to the operator and the environment.
► Wear suitable protective clothing, e.g. gloves or
safety glasses.
Always uninstall the device with pressure and power
turned off! Before uninstallation check whether releasing
the medium is required.
www.balluff.com
R- process connection Process connection
per EN 3852
Returns
Before returning the pressure transmitter clean it carefully
and pack appropriately to prevent shipping damage.
More information about the RMA process can be found at
www.balluff.com.
If your device has come into contact with harmful
materials, a decontamination declaration will also be
required. Devices without a decontamination declaration
will, if there is doubt as to the medium used, be checked
only after receipt of a corresponding declaration.
Disposal
Dispose of the product properly and not as part of the
normal waste stream. Observe the regulations of the
respective country. Information can be obtained from the
national authorities. Or return the product to us for
disposal.
Process connection
per EN 3852 - 400 bar
This product falls under the current EU
Directive for WEEE, waste of electrical and
electronic equipment for protecting you and
the environment from possible hazards and
responsible handling of natural resources.
english
M12x1
24
G1/4"
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bsp m serieBsp v serie

Tabla de contenido